[经验] openwrt 23.05.x以上版本如何安装新版本的tailscale，告别旧版error-嘟嘟社区

问题描述：如果依然用自带源，默认安装的是原来的1.5x版本，在23.05.x以上OP上会出现无法启动的问题，等。

1：下载过渡支持auto update down版本：wget https://github.com/adyanth/openwrt-tailscale-enabler/releases/download/v1.60.0-e428948-autoupdate/openwrt-tailscale-enabler-v1.60.0-e428948-autoupdate.tgz

2：解压到文件系统目录： tar x -zvC / -f openwrt-tailscale-enabler-v1.60.0-e428948-autoupdate.tgz

3：更新源并安装依赖：opkg update && opkg install libustream-openssl ca-bundle kmod-tun

4：启动Tailscalse：/etc/init.d/tailscale start

5：启动参数(将里面的192.168.5.0替换成你自己本地的局域网网段，其它不用改)：tailscale up –accept-routes –advertise-routes=192.168.5.0/24 –accept-dns=false –advertise-exit-node

6：不出意外回车后，就会自动下载最新的1.70.0版本并弹出授权链接(点击链接登入你自己的Tailscalse账号后，就会出现Success,搞定):

–2024-07-28 14:15:51–  https://pkgs.tailscale.com/stable/
Resolving pkgs.tailscale.com… 2617:f941:f::d19, 199.68.171.239
Connecting to pkgs.tailscale.com|2617:f750:f::d19|:443… connected.
HTTP request sent, awaiting response… 200 OK
Length: unspecified [text/html]
Saving to: ‘STDOUT’

–                                                          [ <=>                                                                                                                         ]  41.32K 101KB/s in 0.4s

2024-07-28 14:15:52 (101 KB/s) – written to stdout [42311]

Downloading Tailscale 1.70.0_amd64 ..
–2024-07-28 14:15:52–  https://pkgs.tailscale.com/stable/tailscale_1.70.0_amd64.tgz
Resolving pkgs.tailscale.com… 2607:f740:f::d19, 199.38.181.239
Connecting to pkgs.tailscale.com|2607:f740:f::d19|:443… connected.
HTTP request sent, awaiting response… 302 Found
Location: https://dl.tailscale.com/stable/tailscale_1.70.0_amd64.tgz [following]
–2024-07-28 14:15:53–  https://dl.tailscale.com/stable/tailscale_1.70.0_amd64.tgz
Resolving dl.tailscale.com… 109.105.218.17
Connecting to dl.tailscale.com|109.105.218.17|:443… connected.
HTTP request sent, awaiting response… 200 OK
Length: 27835511 (27M) [application/x-compressed-tar]
Saving to: ‘STDOUT’

–                                                       0%[                                                                                                                               ]    0  –.-KB/s             tailscale_1.70.0_amd64/tailscaled
–                                                       63%[================================================================================>                                              ]  16.92M  1.90MB/s eta 8s    tailscale_1.70.0_amd64/tailscale
–                                                       100%[===============================================================================================================================>]  26.55M  3.32MB/s in 11s

2024-07-28 14:16:05 (2.42 MB/s) – written to stdout [27835511/27835511]

Done!

To authenticate, visit:

      https://login.tailscale.com/a/1a5bbc7y01jft7

Success.

7：设置成开机启动：/etc/init.d/tailscale enable

8：验证开机启动是否成功（如果出现/etc/rc.d/S99tailscale等字符表示成功）：ls /etc/rc.d/S*tailscale*
————上面是openwrt的安装，下面是在Tailscale的设置————-

1：在Machines菜单列表下，找到自己刚刚连接的机器, 点击右边的···的三个点，选择–Disable key expiry(禁用密匙过期，如果不是临时机器建议关掉)

2：继续在···三个点同菜单下，选择Edit router settings（编辑路线设置）,勾选Subnet routes（子网路由,这样你局域网下的所有设备都能连接），勾选Exit node（出口节点，这样你手机tailscale或电脑tailscalse客户端，连接上这个节点时候，就直接使用这个节点的网络了，包括科学上网）

教程完

学习