嘟嘟社区

斯巴达DD后怎么开启IPV6 啊

moe

先安装了 debian9 默认带ipv6 配置如下
  1. cat /etc/network/interfaces
  2. # The loopback network interface
  3. auto lo
  4. iface lo inet loopback
  6. # The primary network interface
  7. auto eth0
  8. iface eth0 inet static
  9. address 45.154.214.17
  10. netmask 255.255.255.0
  12. gateway 45.154.214.1
  13. iface eth0 inet6 static
  14.         accept_ra 0
  15.         address 2604:9cc0:0000:5a00:0000:0000:0000:0001
  16.         netmask 64
  19. post-up /sbin/ip -r route add 2604:9cc0::1 dev eth0
  20. post-up /sbin/ip -r route add default via 2604:9cc0::1

复制代码

然后dd后  网卡变成ens3 遂修改为

  1. # The loopback network interface
  2. auto lo
  3. iface lo inet loopback
  5. # The primary network interface
  6. auto ens3
  7. iface ens3 inet static
  8. address 45.154.214.17
  9. netmask 255.255.255.0
  11. gateway 45.154.214.1
  12. iface ens3 inet6 static
  13.         accept_ra 0
  14.         address 2604:9cc0:0000:5a00:0000:0000:0000:0001
  15.         netmask 64
  18. post-up /sbin/ip -r route add 2604:9cc0::1 dev ens3
  19. post-up /sbin/ip -r route add default via 2604:9cc0::1

复制代码

然后重启网络  systemctl restart networking.service

却报错

Job for networking.service failed because the control process exited with error code.
See "systemctl status networking.service" and "journalctl -xe" for details.

我哪一步做错了啊
没有问题，reboot就可以了

dmxiaoshen 发表于 2021-12-18 11:07
没有问题，reboot就可以了

老哥牛逼 reboot之后确实好了

为啥重启网络报仇  重启还能成功啊