| 本帖最后由 KDE 于 2022-5-13 19:04 编辑
需要注意的是RouterOS默认不支持IPV6 DHCP CLIENT
需要把IP地址网关，写入镜像再DD 
# 创建内存临时目录
mount -t tmpfs tmpfs /tmp/
# 打开内存临时目录
cd /tmp
# 下载RouterOS镜像到内存临时目录
wget https://download.mikrotik.com/routeros/7.3beta37/chr-7.3beta37.img.zip
# 解压
unzip chr-7.3beta37.img.zip
# 加载镜像
kpartx -av chr-7.3beta37.img
# 挂载镜像第二个分区
mount /dev/mapper/loop0p2 /mnt
# 创建开机启动脚本
cat <<EOF> /mnt/rw/autorun.scr
/interface ethernet
set [ find default-name=ether1 ] disable-running-check=no
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/ipv6 address
add address=IPV6地址/64 advertise=no interface=ether1
/ipv6 route
add disabled=no dst-address=::/0 gateway=IPV6网关 routing-table=main
/ip dns
set servers=2606:4700:4700::1111,2606:4700:4700::100
/ipv6 firewall nat
add action=masquerade chain=srcnat
/user set 0 password="设置密码"
/system
reboot
EOF
# 让文件系统只读
echo 1 > /proc/sys/kernel/sysrq
echo u > /proc/sysrq-trigger
#DD
dd if=/tmp/chr-7.3beta37.img of=/dev/硬盘位置 bs=4M status=progress
# 强制重启
echo 1 > /proc/sys/kernel/sysrq
echo b > /proc/sysrq-trigger
# 完成
拳打SS 脚踢V2 头顶TJ
  |